the fan duct down to the CPU.

Note: Lower the guide down as low as possible without touching the CPU cooler. This is the most common way to cool a CPU that comes with a stock cooler.

Performance Mode

If you are a high performance user and you need extra cooling for your CPU.

1.Remove the side panel from the case.

2.Install a 92mm fan to the fan hood so that the air is blowing down to the CPU cooler.

3.Lower the lower air guide with fan down to the CPU cooler. This will bring extra fresh, cool air to the CPU cooler and enhancing CPU cooling efficiency.

4.Connect the fan to the power supply or to the motherboard fan connector as instructed by the manufacturer.

Note: We recommend lowering the air guide down so the separation distance between the 92mm fan and the CPU cooler to 20mm to get the best cooling effect.

Quiet Mode

If you are a quiet computing user and you prefer to install a passive CPU cooler (heat sink without a fan) to get the most possible quiet operation.

1.Install a 92mm fan to the lower air guide as instructed above.

2.Lower the lower air guide down as low as possible without touching the passive heat sink. Note: Please consult the manufacturer's recommendation for the minimum airflow to work with the passive heat sink. You may be able to lower the fan speed beyond the man ufacturer's recommendation, as the air guide will supply fresh cool air to the heat sink directly. This will reduce the fan noise even further.

Maintaining the Washable Air Filter

From time to time it will be necessary to wash the installed air filter. Not washing the air filter will result in higher system temperatures and possible stability problems. We recommend checking the air filter at least once a month initially. The frequency will change depending on system usage (users whose systems run 24/7 will likely have to check/wash more often than those who don't use their systems every day) and on environmental conditions.

To remove the front door

In case you need to remove the double hinge door, open the door to 90º, and gently press the small plastic tab on the upper hinge. Tilt the door away from the upper hinge pin, then lift the door off the lower hinge pin. Set the door aside in a safe place.

To replace the door

Place the lower hinge slot over the lower hinge pin and press or rotate the top of the door in so that the tab fully engages with the upper hinge pin.

7

Page 6 Page 8
Page 7
Image 7
Antec 1088AMG, TX1050B Performance Mode, Quiet Mode, Maintaining the Washable Air Filter, To remove the front door
Page 6 Page 8

1088AMG, TX1050B specifications

The Antec 1088AMG and TX1050B are two prominent computer cases that cater to the needs of gamers and PC enthusiasts, offering a blend of functionality, aesthetics, and expandability. Both models stand out in the crowded market of PC enclosures, showcasing their unique features and technologies.

Starting with the Antec 1088AMG, this mid-tower case is designed with an emphasis on cooling and airflow. It boasts a sleek black finish, complemented by a sturdy steel construction that ensures durability. The case features a spacious interior, allowing for easy installation of high-end components and ample room for cable management. Its front panel includes two USB 2.0 ports, audio inputs, and a power/reset button, providing convenient access for users.

The cooling capabilities of the 1088AMG are noteworthy, with support for multiple fans. The case comes pre-equipped with two120mm fans, one at the front and one at the rear, promoting efficient airflow. Additionally, the case supports extra fan placements, which can be crucial in keeping high-performance components, such as powerful graphics cards and CPUs, from overheating during intensive tasks.

Transitioning to the TX1050B, this model emphasizes versatility and expandability. It features a classic design with a glossy black front panel and a perforated metal side panel for enhanced ventilation. Similar to the 1088AMG, the TX1050B is designed for optimal airflow with support for several cooling options. It can accommodate up to five fans, ensuring that the interior remains cool even under heavy loads.

The TX1050B also understands the importance of space and organization. It includes seven expansion slots, enabling users to install multiple graphics cards or other expansion cards. The case has dedicated cable management features, allowing for tidy wiring and enhanced airflow. Additionally, the tool-less drive bays simplify the installation of hard drives and optical drives, making the building process straightforward.

Both the Antec 1088AMG and TX1050B support a wide range of Motherboards, from Micro-ATX to ATX, making them flexible choices for various build configurations. The cases also include dust filters to keep the interior clean and maintain performance.

In conclusion, the Antec 1088AMG and TX1050B provide solid performance, excellent thermal solutions, and user-friendly features. Their designs cater to those who demand reliability and expandability from their computer cases, ensuring they can build robust systems that can handle demanding applications. Whether for gaming or general use, these cases offer a comprehensive package for any PC builder.
Top Page Image Contents