Antex electronic SX-33E, SX-33B To set adapter type, Test new settings by selecting Test

1.Select Control Panel in the Main group of the Program Man- ager. Then select Drivers.

2.Select "Antex Audio Driver for Windows" from the list of in- stalled drivers. Click on Setup.

3.To set adapter type:

"Antex Audio Driver Setup" displays the adapter types assigned to adapters 1-4. Change the type by using the drop down menus for each adapter. Information about the number of de- vices, I/O address, and interrupt number are displayed to the right of each adapter.

4.To set the number of devices, I/O address, or interrupt number:

Select Advanced in "Antex Audio Driver Setup". Select an adapter to reconfigure.

Change the number of devices, I/O address, or interrupt num- ber by selecting the appropriate buttons. Invalid choices are displayed in gray. Note: The I/O address and interrupt must match the jumper settings on the board. For more information refer to JUMPER SETTINGS.

Test new settings by selecting Test.

NOTE: The driver version number and date displayed in the middle left of the "Antex Advanced Setup" screen. Refer to this information when reporting problems to Antex Technical Sup- port.

13