Center of Screen - Mixer
Controls the connections between source and destination lines. To change a connection, click and hold on the source channel button of the connection you wish to redi- rect. Drag the pointer to the new destination channel but- ton and release the mouse button (you will see a line as you move across the mixer screen).
Bottom Right of Screen
Displays driver status and errors.
PROBLEMS RUNNING THE DEMO
Symptom: | The screen appears to be frozen. |
Solutions:
1.Verify that the driver is loaded.
2.Make sure you type the correct I/O and interrupt locations on the command line of ADG.
3.Make sure to use the HEX value for the I/O.
4.Make sure syntax of ADG line is correct.
5.Make sure the I/O and interrupt of the Z1/Z1e/
20