Anthem Audio AVM 20-HD, AVM 30-HD BACK, SELECT, SELECT, All Timers:, SETTING UP THE AVM, 1.SET TIME / TIMERS, 3.1SET TIME / TIMERS, ANTHEM AVM 50 SETUP MENU, To set Current Time and Day:

3. SETUP MENU continued …

SETTING UP THE AVM 50

When you enter the Setup Menu, your On-Screen display will show the menu below. Only 8 menu items can be displayed at one time. To go to a submenu, highlight a menu item in red and then press SELECT.

ANTHEM AVM 50 SETUP MENU

1.SET TIME / TIMERS

2.SPEAKER CONFIGURATION

3.LISTENER POSITION

4.SPEAKER LVL CALIBRATION

5.SOURCE SETUP / PRESETS

6.ADJUST INPUT LEVELS

7.ADC / AUDIO OUTPUT

8.VIDEO OUTPUT

9.VOLUMES / RENAME PATHS

10.TRIGGERS / IR / RS-232

11.DISPLAYS / TIMEOUT

12.SAVE / RESTORE SETTINGS

13.LOCKOUT / PASSWORDS

3.1SET TIME / TIMERS

The time and day, plus 6 different timers are set in this menu. The timers in the AVM 50 are like an alarm clock, but allow two different timer settings for each of MAIN, ZONE2, and ZONE3.

1.SET TIME / TIMERS

a.CURRENT TIME : 12:00 AM

b.CURRENT DAY : Sunday

c.TIME FORMAT : 12 Hr

d.ALL TIMERS : Disabled

e.SET MAIN TIMERS

f.SET ZONE2 TIMERS

g.SET ZONE3 TIMERS

To set Current Time and Day:

•Enter the Setup Menu. Go to ‘1. SET TIMERS/TIME’ and press SELECT.

•Press the  button until you reach ‘c. TIME FORMAT: 12 Hr’.

•Use the  buttons and choose ‘12 Hr’ or ‘24 Hr’.

•Press the  button to go to ‘a. CURRENT TIME: 12:00 AM’.

•Press SELECT. ‘12’ will be highlighted in red.

•Use the Master Control Knob or the  buttons to set the current hour.

•Press the button. ‘00’ minutes will be highlighted.

•Use the Master Control Knob or the  buttons to set current minutes.

•Press BACK to return to the menu line.

•Press the  button to go to ‘b. CURRENT DAY: Sunday’.

•Use the  buttons to set the current day.

All Timers:

This allows you to simultaneously ‘Enable’ or ‘Disable’ all Timers for MAIN, ZONE2, and ZONE3.

16