3.SETUP MENU continued …

3.13LOCKOUT / PASSWORDS

Passwords are used to protect the saved User and Installer settings. Once you have set a password, it can also be used as a Lockout to prevent settings from being changed by anyone without one of the passwords.

13. LOCKOUT / PASSWORDS

a.SET SETUP MENU LOCKOUT

b.SET USER PASSWORD

c.SET INSTALLER PASSWORD

Set Setup Menu Lockout:

When set to ‘Yes’, this prevents anyone without a password from entering the Setup. When you attempt to enter the Setup, you will be asked for your Password – either the USER or INSTALLER Password must then be entered from the Remote Control before you will be allowed to continue.

Set User or Installer Password:

When setting the USER or INSTALLER Password, you will be asked to enter a four digit number. Pick one that you will remember easily. To enter that number, use the 0 – 9 keys on the Remote Control (password cannot be entered from the Front Panel). To change an existing password, enter the old one first, then enter (and confirm) the new one. Write it down in case it’s forgotten in the future!

Example 1: Set User Password (Remote Control only).

•Enter the Setup Menu. You must enter the USER or INSTALLER Password if there is one.

•Go to ‘13. LOCKOUT/PASSWORDS’ and press SELECT.

•Press the  key to go to ‘b. SET USER PASSWORD’.

•Press SELECT. You will be asked to enter a four digit number. Use the 0 – 9 keys to do so. If you are changing your Password you will be asked to enter your old Password first. You will also be asked to confirm your new Password (re-enter your new Password).

•When finished, press  to go to another menu item, or...

•Press BACK to leave the submenu and return to the main menu.

Clearing the User Password: When asked for your new Password, press the  key four times. You will also be asked to confirm your new Password – press the  key four times again. Message will then say ‘User Password Removed’.

Example 2: Set Setup Menu Lockout.

•Enter the Setup Menu. Go to ‘13. LOCKOUT/PASSWORDS’ and press SELECT.

•Upon entering this menu item, ‘a. SET SETUP MENU LOCKOUT’ will be highlighted in red.

•Press SELECT. You will be asked to enter your Password. Either the USER or INSTALLER Password will work. Use the 0 – 9 keys to do so.

•Use the  buttons to change to ‘Yes’ or ‘No’.

•Press SELECT or BACK.

•When finished, press  to go to another menu item, or...

•Press BACK to leave the submenu and return to the main menu.

43