4.OPERATION continued …

4.3MANUALLY COPYING THE MAIN PATH TO ZONE2, ZONE3, OR RECORD

When Main is copied to another Path, the Source selected in MAIN is directed to ZONE2, ZONE3, or RECORD from either analog or digital inputs.

If a source component’s audio is connected to the AVM 50 using digital connection only, then the Copy function is the only way to deliver the sound to another Path.

Front Panel

Press MAIN simultaneously with ZONE2, ZONE3, or REC. Use MAIN to select the Source.

Remote Control

Make sure the appropriate control mode is set, or REC Path is selected, then press COPY.

PIP

COPY

When MAIN is copied, the display for the other Paths reads “–MAIN–> ZONE2” (or ZONE3 or REC), along with the information normally displayed. Copy can also be set permanently – see section 3.5.

Down-Mixing to 2-Channel Stereo:

The Center, Surround, and Rear channels can be mixed into the Left and Right Channels for the ZONE2, ZONE3, TAPE, and VCR outputs. This can be done by the DVD player or the AVM 50:

•AVM 50 Down-mix:If the digital audio output from your DVD player is connected to the AVM 50, the AVM 50 down-mixes 5.1 channels into 2.0 whenever you copy MAIN to another Path. This applies whether the input is, Dolby Digital, DTS, or 6-Ch input.

•DVD Player Down-mix:If the Left/Right analog outputs from your DVD player are connected to the AVM 50’s Analog Audio-In, the Dolby Digital down-mix done by your DVD player can be used for ZONE2, ZONE3, TAPE, and VCR outputs, without having to copy MAIN. Note that DVD players do not normally provide a down-mix for DTS material.

4.4SOURCE SELECTION

After making sure that you are in the appropriate Path (Front Panel) or appropriate control mode is set (Remote Control), select a Source.

PIP SWAP MOVE

COPY 2-Ch 6-Ch

CD AUX TAPE

SSP SOURCE

DVD TV SAT

 

 

P

 

 

P AT

S

 

H

S

 

 

 

REC

FM

AM

VCR

6-Channel Analog Audio Input:

The 6-Ch audio can be routed to ZONE2, ZONE3, and RECORD outputs as long as Copy mode, which creates the stereo down-mix, is used (see section 4.3).

Source Seek (Remote Control Only):

The SOURCE SEEK   keys detect the previous/next active Source, while thekey advances one Source at a time. To increase seeking speed, set all unused HDMI and Component video inputs to ‘None’ (see section 3.5).

SOURCE SEEK

45