SAFEGUARDS

Power Sources: This unit was designed to operate at mains voltages from 90 to 250 Volts AC, 50-60 Hz.

Risk of Electrical Shock: Refer servicing to qualified service personnel.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

GROUNDING/EARTHING

IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED.

To ensure safe operation, the three pin plug supplied must be inserted only into a standard three-pin power point which is effectively grounded through the normal household wiring. Extension cords used with the equipment must be three-conductor and be correctly wired to provide connection to earth ground. Improperly wired extension cords are a dangerous electrical hazard.

The fact that the equipment operates satisfactorily does not imply that the power point is properly grounded and that the installation is completely safe. If any doubt exists about the correct grounding of the power point, consult a qualified electrician.

IMPORTANT: The wires in this main lead are colored in accordance with the following code:

Green and yellow

Earth

 

 

Blue

Neutral

 

 

Brown

Live

 

 

FUSE TYPE/REPLACEMENT

The mains input of the PowerCharger is fused using a printed circuit board mounted device which should be replaced ONLY by a qualified service technician.

OPERATION

Self-Test

Upon applying mains power, each PowerCharger will initiate a self-test mode. This mode is indicated in the LCD, by an audible alert and the lighting of each LED on the PowerCharger in sequence. Upon completion of the self-test, the green status light will light steadily, indicating that the unit is ready for operation.

NOTE: Disconnect the camera cable from the 4 Pin XLR Connector located on the back of the PowerCharger.

Software revision, power rating, and model number can be obtained from the Signature Display. When the LCD shows the main display screen, press the TEST button on the front panel.

3

Page 5
Image 5
Anton/Bauer QUAD 2702, DUAL 2702 owner manual Safeguards, Grounding/Earthing, Fuse TYPE/REPLACEMENT, Operation, Self-Test

DUAL 2702, QUAD 2702 specifications

Anton/Bauer is a leading name in battery technology, especially renowned for its line of professional camera batteries and chargers. Among its standout products are the QUAD 2702 and DUAL 2702 battery chargers, specifically designed for the demanding needs of the broadcast and film industries. Both models provide reliable charging solutions to keep your camera equipment powered throughout rigorous shooting schedules.

The Anton/Bauer QUAD 2702 is a sophisticated four-position charger that caters to multiple battery types, including Gold Mount and V-Mount batteries. One of its primary features is the ability to charge two batteries at a time, significantly enhancing workflow efficiency. The charger uses advanced smart charging technology that automatically detects the chemistry of the attached batteries, optimizing the charging process for maximum performance and longevity.

Built with durability in mind, the QUAD 2702 features a rugged casing that withstands the rigors of on-set use. Additionally, its integrated LED indicators display the charging status of each battery, allowing users to monitor multiple batteries at a glance.

The DUAL 2702, while similar in many ways to its quad counterpart, offers charging capabilities for two batteries simultaneously. This makes it an ideal choice for smaller production teams or operators who might not require the full capacity of the QUAD model. Like the QUAD 2702, it also features an advanced charging algorithm that maximizes battery life, ensuring that professional videographers get the most out of their investment.

Both chargers are designed with versatility in mind. They are compatible with a wide range of Anton/Bauer batteries, making them an essential tool for any filmmaker or photographer. The DUAL and QUAD 2702 units also come equipped with a power supply circuit that can handle a wide range of input voltages, allowing them to be used in various locations around the world without issue.

In summary, the Anton/Bauer QUAD 2702 and DUAL 2702 battery chargers represent the pinnacle of professional battery charging solutions. With their robust construction, advanced charging technologies, and user-friendly design, they are invaluable assets for any audio-visual production team. Whether you're shooting on location or in a studio, these chargers ensure your equipment remains powered, allowing you to focus on what matters most: capturing stunning visuals.