The Logic Seriesbattery, like all professional Anton/Bauercamera batteries, is designed only in 13.2 volt and 14.4 volt configurations with full discharge ratings of 11 and 12 volts respectfully. Thus, the Logic Series battery will always deliver 100% capacity before the equipment ever reaches its cutoff point. Moreover, this dependability is not affected by temperature, memory, age or any of the other factors that can cripple a 12 volt battery.

APPLICATIONS

Virtually all cameras, camcorders, and other video field equipment specifies a maximum voltage of 17 volts. A 14.4 volt battery will provide superior performance and greater run time on that equipment.

CAUTION: Certain older equipment is not designed to accept 14.4 volt NiCad batteries. The 14.4 volt Logic Series battery could damage such equipment. Check with the equipment manufacturer or the Anton/Bauer Service Center prior to using a 14.4 volt battery. If a question of applicability exists, the 13.2 volt Logic Series battery is fully compatible with any equipment specifying a “12 volt DC source”.

PROPAC

The ProPac battery is the ideal source for all cameras and camcorders. With an accessory Gold Mount Bracket, it can be used to power color monitors, waveform monitors, vector scopes and virtually any other video equipment designed to be operated from 12 volt DC power.

The ProPac battery is also the preferred power source when using the Anton/Bauer Ultralightor Ultralight 2 “on-camera” accessory light. The Gold Mount Bracket features an integral “PowerTap” receptacle that can power the Ultralight directly from the battery powering the camera or camcorder.

- 2 -

Page 4
Image 4
Anton/Bauer Trimpac 13/14, ProPac 13/14 owner manual Applications, Propac