Anton/Bauer publishes a comprehensive “Video Battery Handbook” to help you further maximize the life and performance of your new battery. This guide is available, at no charge, by contacting Anton/Bauer at 1-
SHORT / FUSE REPLACEMENT
The Logic Series ProPac battery has an integral externally replaceable fuse located in the back (mounting side) of the battery:
CHARGE
STATUS
INDICATOR
ACTIVE FUSE 
DIAGRAM A
“A”
SPARE FUSE
The fuse and spare fuse are easily replaced by edging a key into the depressions marked “A” and prying the holders up. USE ONLY A 12.5A/125 volt FUSE FOR REPLACEMENT (Anton/Bauer P/N 3713- 1271). This will insure continued protection of your battery. Replacement with other type fuses could cause battery failure in the event of circuit overload. It is advised to replace the spare fuse as soon as possible. Place the blown fuse into the spare fuse holder so as to retain it in the battery.
- 7 -
