TRIMPAC

The lightweight high energy Trimpac battery is the ideal match for the latest generation of smaller CCD cameras and camcorders. The Trimpac will provide excellent run times in applications previously using slide-in type batteries. Run time improvements to 100% are quite common with the Trimpac.

CHARGING WITH LOGIC SERIES CHARGERS

Charge this battery fully before using. Allow the battery to reach a steady green (Lifesaver®) mode before using. Charging is automatic on all Logic Series chargers. The flashing red and green lights indicate the charger and battery are establishing communications. The following are the standard indications on any Logic Series Lifesaver Charger (Please refer to the charger manual for complete charger instructions):

Alternating red and green: Evaluating battery and/or rejuvenating low voltage battery.

Steady red: Battery waiting to charge (may either be in line to charge or holding for temperature stabilization).

Flashing red: Charging.

Flashing green: Balancing mode. Battery is typically more the 80% charged.

Steady green: Lifesaver mode. Batteries will remain 100% ready for use indefinitely.

- 3 -

Page 5
Image 5
Anton/Bauer ProPac 13/14, Trimpac 13/14 owner manual Charging with Logic Series Chargers