U
Us
se
er
r
M
Ma
an
nu
ua
al
l
P
Pa
ag
ge
e
2
26
6
o
of
f
3
37
7
To Set LCR
1. Select <LCR> under Base Settings mode;
2. Press Left key, and key in the PIN;
3. Press Left key, then key in the SHORT number that you want to replace the
long number;
4. Press Left key to confirm, then key in the LONG number;
5. Press Left key to confirm.
To Change Base PIN
1. Select <PIN> under Base Settings mode;
2. Press Left key, and key in the original PIN (default PIN:0000) number;
3. Then press Left key to confirm, and key in New PIN;
4. Press Left key, then key in New PIN again;
5. Press Left key to confirm.
Default Settings
1. Select <Default settings> under Base Settings mode;
2. Press Left key, and key in the current PIN number;
3. Press Left key to confirm, you will hear a beep, then all features will return to
their default settings.
The following default settings are for you reference:
1). Reset Flash time to Long,
2). Delete call barring number.
3). Reset master pin number to 0000.
4). Reset ringer melody and volume.
5). Dial mode reset to Tone.
6). Remove Auto Pause number.
7). Remove LCR (if available).