U
Us
se
er
r
M
Ma
an
nu
ua
al
l
P
Pa
ag
ge
e
3
31
1
o
of
f
3
37
7
2. Key in the number of the other handset
On the other handset's display, your number a ppears, and the INT symbol flashes. Then
the other handset user presses the Call key to connect the call.
For details of how to change the ringing melody and volume for intercom calls, see "INT
MELODY" and "INT VOLUME" under "HANDSET SETTING" part.
To End an Intercom Call
• Press the Call key on your handset. The other person will hear Busy tone, and
also need to press the End key to hand up.
To Transfer a Call
To transfer the outside call to another handset (
if you have two or more
handsets):
1. Press the INT key and key in the number of the other handset.
2. The outside call is put on hold. When the other handset answers, you can speak to
the user. If the other handset does not answer, you can get back to the outside call
by pressing the INT button again.
To transfer the outside call to another outside phone (
Network Depending)
:
1. Press the Recall key and key in the call number you want to transfer.
2. The outside call is put on hold. When the call a nswers, you can speak to the user,
then press the End key to hang up and transfer the call.
Always check first that:
• You have followed the steps listed on pages to install and set up your HS315.
• All connects are firmly inserted in their sockets.
• Mains power is switched on at the socket.
• The handset’s batteries are correctly and securely installed, and are not run down.
If you experience difficulties with the working of your HS315, refer to the advice given
below.
After mount the CD-ROM provided into your PC CD ROM Drive, the installation
does not auto run.