U
Us
se
er
r
M
Ma
an
nu
ua
al
l
P
Pa
ag
ge
e
3
32
2
o
of
f
3
37
7
Look for the CD-ROM icon namely HS-315 under PC “My computer” and double chick
to enter the installation interface manually and select the setup icon.
Click My computer > HS-315 > setup
The installation CD Graphic User Interface will appear on your screen as following:
Please follow the setup in the wizard and the driver should be able to install successfully.
If you still can’t enter the installation interface, please check whether the CD-ROM or PC
CD ROM Drive is broken. If yes, contact your supplier immediately.
I cannot make or answer calls.
Check that the base unit’s mains power adapter is plugged in and power is switched on.
The base unit needs mains power for normal operation of the phone-not just charging the
batteries.
Make sure you are using the telephone line cable that was supplied with your HS315.
Other telephone line cables might not work.
Move the handset closer to the base unit.
Check the batteries level symbol on the di splay. If it is low, replac e the handset on the
base unit or charger pod to recharge the batteries.
Switch off power at the mains socket, wait for a few seconds and then switch back on.
This may solve the problem.