APC 1400XLT, 3000XLT, 2200XLT user manual User Configuration Items, UPS ID Upsiden

14. User Configuration Items

Note: Setting these items requires optional software or hardware.

Function	Factory	User Selectable	Description
	Default	Choices
	Every 14	Every 7 days (168	Sets the interval at which the UPS will
Automatic Self-Test	days (336	hours), On Startup
			execute a self-test.
	hours)	Only, No Self-Test
		Up to eight	Use this field to uniquely identify the
UPS ID	UPS_IDEN	characters to define	UPS for network management
		the UPS.	purposes.
Date of Last Battery	Manufactur	Date of Battery	Reset this date on battery
Replacement	Date	Replacement	replacement.
Minimum Capacity			The UPS will charge its batteries to
Before Return from	0 percent	15, 50, or 90 percent	the specified percentage before return
Shutdown			from a shutdown.
			Set lower than normal sensitivity to
			avoid lowered battery capacity and
Sensitivity	Normal	Reduced, Low	service life in situations where the
			load can tolerate minor power
			disturbances.
			Sets the time before shutdown at
Duration of Low			which the UPS issues a low battery
	2 minutes	5, 7, or 10 minutes	warning. Set higher than the default
Battery Warning
			only if the OS needs the time for
			graceful shutdown.
Alarm Delay After	5 second	30 second delay, At	To avoid alarms for minor power
		Low Battery
Line Fail	delay		glitches, set the alarm delay.
		Condition, No Alarm
		180, 300, or 600	Sets the interval between when the
Shutdown Delay	20 seconds		UPS receives a shutdown command
		seconds
			and when shutdown occurs.
			To avoid branch circuit overload, the
Synchronized	0 seconds	60, 180, 300 seconds	UPS will wait the specified time after
Turn-on Delay			the return of utility power before
			turn-on.
High Transfer Point	253 Vac	264, 271, 280 Vac
Low Transfer Point	196 Vac	188, 204, 208 Vac

33