Intel S845WD1-E Setting the Bios Configuration Jumper, Function/Mode Jumper Setting Configuration

Setting the BIOS Configuration Jumper

CAUTION

Always turn off the power and unplug the power cord from the server before changing the jumper. Moving the jumper with the power on may result in unreliable server operation.

J6H1

OM14346

Figure 14. BIOS Configuration Jumper Block Location

This three-pin jumper block, shown in Figure 14, enables all server board configurations to be done in BIOS Setup. Table 12 shows the jumper settings for the Setup program modes.

Table 12. Jumper Settings for the BIOS Setup Program Modes

Function/Mode	Jumper Setting	Configuration
Normal	3	The BIOS uses current configuration information and passwords
		for booting.
	1-2
	1
Configure	3	After the POST runs, Setup runs automatically. The maintenance
		menu is displayed.
	2-3
	1
Recovery	3	The BIOS attempts to recover the BIOS configuration. A recovery
		diskette is required.
	None
	1

54 Intel Server Board S845WD1-E Product Guide