7.Attach the fan heat sink clips to the processor socket.

a.Align the heat sink and clip assembly with the retention mechanism and place it on the processor. The heat sink is symmetrical.

b.With the clip levers in the up position, use a flat head screw drive to push down on all four clip frame corners to secure to the retention mechanism hooks (see Figure 10).

c.Close the clip levers completely.

OM14470

Figure 10. Attaching the Fan Heat Sink Clips to the Processor Socket

8. Connect the processor fan cable to the processor fan connector (see Figure 11, A).

A

OM14483

Figure 11. Connecting the Processor Fan Cable to the Processor Fan Connector

48

Intel Server Board S845WD1-E Product Guide

Page 48
Image 48
Intel S845WD1-E manual Attaching the Fan Heat Sink Clips to the Processor Socket