Table 23. Primary/Secondary IDE Master/Slave Submenus (continued)
Feature | Options | Description | |
|
|
|
|
PIO Mode (Note) | • | Auto (default) | Specifies the PIO mode. |
(This feature is present | • | Mode 0 |
|
only when Type is not | • | Mode 1 |
|
set to Auto.) |
| ||
• | Mode 2 |
| |
|
| ||
| • | Mode 3 |
|
| • | Mode 4 |
|
|
|
|
|
Ultra DMA | • | Disabled (default) | Specifies the Ultra DMA mode for the drive. |
(This feature is present | • | Mode 0 |
|
only when Type is not | • | Mode 1 |
|
set to Auto.) |
| ||
• | Mode 2 |
| |
|
| ||
| • | Mode 3 |
|
| • | Mode 4 |
|
| • | Mode 5 |
|
|
|
| |
Cable Detected (Note) | No options | Displays the type of cable connected to the IDE | |
|
|
| interface: |
|
|
| (for |
|
|
|
|
Note: | These configuration options appear only if an IDE device is installed. |
Diskette Configuration Submenu
To access this menu, select Advanced on the menu bar, then Diskette Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
The submenu represented by Table 24 is used for configuring the diskette drive.
Table 24. Diskette Configuration Submenu
Feature | Options |
| Description | |
|
|
|
|
|
Diskette Controller | • | Disabled |
| Disables or enables the integrated diskette |
| • | Enabled (default) | controller. | |
|
|
|
|
|
Floppy A | • | Not Installed |
| Specifies the capacity and physical size of |
| • | 360 KB | 5¼" | diskette drive A. |
| • | 1.2 MB | 5¼" |
|
| • | 720 KB | 3½" |
|
| • | 1.44/1.25 MB | 3½" (default) |
|
| • | 2.88 MB | 3½" |
|
|
|
|
|
|
continued
Configuration Software and Utilities | 71 |
