Intel S845WD1-E manual Auto default, Bi-directional, IRQ 7 default, Enabled Default

Table 21. Peripheral Configuration Submenu (continued)

Feature	Options		Description
Mode	•	Normal (default)	Specifies the mode for serial port B.
	•	IrDA SIR-A
	•	ASK-IR
Parallel Port	•	Disabled	Configures the parallel port.
	•	Enabled	Auto assigns LPT1 the address 378h and the
	•	Auto (default)	interrupt IRQ7.
			An * (asterisk) displayed next to an address indicates a
			conflict with another device.
Mode	•	Output Only	Selects the mode for the parallel port. Not available if the
	•	Bi-directional	parallel port is disabled.
		(default)	Output Only operates in AT-compatible mode.
	•	EPP	Bi-directionaloperates in PS/2-compatible mode.
	•	ECP	EPP is Extended Parallel Port mode, a high-speed
			bi-directional mode.
			ECP is Enhanced Capabilities Port mode, a high-speed
			bi-directional mode.
Base I/O Address	•	378 (default)	Specifies the base I/O address for the parallel port.
(This feature is present	•	278
only when Parallel Port is
set to Enabled)
Interrupt	•	IRQ 5	Specifies the interrupt for the parallel port.
(This feature is present	•	IRQ 7 (default)
only when Parallel Port is
set to Enabled)
DMA	•	1	Specifies the DMA channel.
(This feature is present	•	3 (default)
only when Parallel Port
Mode is set to ECP)
Keyboard Error Message	•	Disabled	Enables or disables keyboard error reporting.
	•	Enabled
		(default)
LAN#1 Controller	•	Disabled	Enables or disables the on-board LAN#1 device.
	•	Enabled
		(default)
LAN#2 Controller	•	Disabled	Enables or disables the on-board LAN#2 device.
	•	Enabled
		(default)
ATA RAID Controller	•	Disabled	Enables or disables the on-board ATA RAID controller.
	•	Enabled
		(default)
ATI Rage Video	•	Disabled	Enables or disables the on-board ATI* Rage video
	•	Enabled	controller.
		(default)
Legacy USB Support	•	Disabled	Enables or disables Legacy USB support.
	•	Enabled
		(default)

68 Intel Server Board S845WD1-E Product Guide