Installing the I/O Shield

CAUTION

Systems based on the S845WD1-E server board need the I/O shield properly installed to pass emissions (EMI) certification testing and to meet Class B emissions compliance levels. Without the I/O shield, or with an improperly installed I/O shield, the server system will not meet Class B regulatory compliance requirements.

The boxed server board comes with an I/O shield for a general purpose chassis. If installing this board in an 1U chassis, obtain an I/O shield from the chassis vendor. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis.

Install the I/O shield before installing the server board in the chassis. Place the shield inside the chassis and press the shield into place so that it fits tightly and securely. If the shield doesn’t fit, obtain a proper-sized shield from the chassis supplier.

 

.787

 

 

 

 

.010 TYP

 

 

 

 

 

 

 

 

 

DTL M

[20

 

 

 

 

 

0.254]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHT 2

 

 

 

 

 

 

 

 

 

 

6.390 REF

 

 

O.039

DTL D

[162.3]

DTL P

DTL P

[1]

9

 

SHT 2

 

SHT 2

SHT 2

.884

[22.45]

A

0.276

[7.012]

.000

[0] .465

[11.811]

.567

[14.4]

.000

[0]

.447

[11.345]

1.807

[45.892]

2.079

[52.804]

3.219

[81.768]

5.010

[127.25]

.063 .005 14

[1.6 0.12]

8X R0.5 MIN

A

.567

[14.4]

Pictorial

View

OM14350

Figure 6. I/O Shield Dimensions

Server Board Installation and Upgrading

45

Page 45
Image 45
Intel S845WD1-E manual Installing the I/O Shield, O Shield Dimensions