Intel S845WD1-E manual Removing the Battery

To replace the battery, follow these steps:

1.Observe the safety and ESD precautions at the beginning of this chapter.

2.Turn off all peripheral devices connected to the server. Disconnect the server’s power cord from the AC power source (wall outlet or power adapter).

3.Remove the server cover.

4.Locate the battery on the board (see Figure 12).

5.With your fingertip, gently pull back the tab away from the battery.

Pull out the battery. Note the orientation of the “+” and “-” on the battery.

6.Install the new battery in the connector, orienting the “-” as shown in Figure 12.

7.Replace the server cover.

OM14344

Figure 12. Removing the Battery

52 Intel Server Board S845WD1-E Product Guide