![](/images/new-backgrounds/1205369/20536917x1.webp)
Operation
Display Panel Functions
Feature | Feature Title | Function | |||
Button | |||||
|
| ||||
|
|
|
|
| |
|
|
| Power On | Press this button to turn on the UPS. Continue reading for additional | |
|
|
|
| capabilities. | |
|
|
|
|
| |
|
|
| Power Off | Press this button to turn off the UPS output. | |
|
|
|
| NOTE: The battery will continue to charge and the fans will continue to run |
while the UPS is connected to the utility.
|
| Cold Start | When there is no utility power and the UPS is off, press and hold the | button |
|
|
| to power up the UPS and connected equipment. |
|
|
|
| NOTE: The UPS will emit two beeps. During the second beep, release the button. | |
|
|
|
| |
|
| Automatic: The UPS performs a | ||
|
|
| every two weeks thereafter (by default). During the | |
|
|
| operates the connected equipment On Battery. |
|
Manual: Press and hold the button for a few seconds to initiate the
On Battery Operation
The UPS switches to battery operation automatically if the utility power fails. While running On Battery, an alarm beeps four times every 30 seconds.
Press the button to silence this alarm. If the utility power does not return, the UPS continues to supply power to the connected equipment until the battery is fully discharged.
When 2 minutes of run time remain, the UPS emits a continuous beeping. If PowerChute is not being used, files must be manually saved and the computer must be turned off before the UPS fully discharges the battery.
Refer to www.apc.com for information on battery runtimes. The UPS battery runtime differs based on usage and environment.
Utility Voltage Measurement
Feature Display | Feature Title | Description | ||
100V | 110/120V | Diagnostic Utility | The UPS has a diagnostic feature that indicates the utility voltage | |
Voltage | coming into the UPS. The UPS starts a | |||
118.0 | 138.2 | |||
| procedure. The | |||
108.7 | 128.8 |
| ||
| “Troubleshooting,” beginning on page 15 for additional information. | |||
99.3 | 119.5 |
| ||
|
|
90.0110.1
80.6100.8
1.Press and hold the button to view the utility voltage bar graph indicator.
2.After a few seconds, the indicator will show the utility input voltage.
3.Refer to the appropriate voltage (100 or 110/120) reading. Values are not listed on the UPS. The actual input voltage is between the displayed value on the list and the next higher value.
9 |