Threshlds screen | APC ACSC101, ACSC100 instruction

Displayed Alarm Message	Severity	Action Required

Filter Sensor Fault	Warning	• A hardware failure exists. For assistance, refer to the back page of
		this manual for contact information.

High Discharge Pressure Alarm	Critical	• For assistance, refer to the back page of this manual for contact
		information.

Internal Communication Fault	Critical	• A hardware failure exists. For assistance, refer to the back page of
		this manual for contact information.

Low Suction Pressure Alarm	Warning	• For assistance, refer to the back page of this manual for contact
		information.

Rtn Air High Temp	Warning	• Make sure the Return Air threshold is set correctly in the Set Unit
(Return Air High Temperature		Threshlds screen.
Violation)		• If the problem persists, contact APC at a number on the back cover
		of this manual.

Sply Air High Temp	Warning	• Make sure the Supply Air threshold is set correctly in the Set Unit
(Supply air High Temperature		Threshlds screen.
Violation)		• If the problem persists, contact APC at a number on the back cover
		of this manual.

Persistent High Discharge	Critical	• For assistance, refer to the back page of this manual for contact
Pressure Alarm		information.

Persistent Low Suction Pressure	Critical	• Indicates there were 3 Low Suction Pressure shutdowns in 30
Alarm		minutes. Alarms must be cleared manually.
		• For assistance, refer to the back page of this manual for contact
		information.

Rack Inlet High Temperature	Critical	• Make sure the Rack Inlet High Temperature Threshold is set
Violation		correctly in the "Thresholds" screen.
		• Make sure remote temperature sensor is installed correctly in the
		rack inlet air stream.
		• If the problem persists, refer to the back page of this manual for
		contact information.

Rack Inlet Temperature Sensor	Critical	• For assistance, refer to the back page of this manual for contact
Fault		information.

Suction Pressure Sensor Fault	Warning	• A hardware failure exists. For assistance, refer to the back page of
		this manual for contact information.

Suction Temperature Sensor	Warning	• A hardware failure exists. For assistance, refer to the back page of
Fault		this manual for contact information.

Water Detection Fault	Warning	• Identify the source of the leak.
		• For assistance, refer to the back page of this manual for contact
		information.

Grp Comm Fault	Critical	• Make sure the number of cooling units in the group is configured
(Group Communication Fault)		properly and the A-Link connections between cooling units are
		correct.
		• Make sure the system is receiving power and is connected properly.
		• A hardware failure exists. For assistance, contact APC at a number
		on the back cover of this manual.

InRow SC Operation

ACSC101, ACSC100 specifications

The APC ACSC100 and ACSC101 are power distribution units designed to manage and protect electronic equipment in data centers and critical infrastructure environments. Known for their reliability and efficiency, these models provide an essential solution for organizations that depend on constant power supply and equipment availability.

One of the main features of the APC ACSC100 and ACSC101 is their modular design. This flexibility allows for tailored configurations based on the user's unique requirements, making them suitable for diverse environments, from small server rooms to large-scale data centers. The units can accommodate a variety of input and output configurations, which helps in optimizing space and enhancing power management strategies.

These models are equipped with advanced technologies that enhance their performance. For instance, the ACSC100 and ACSC101 incorporate intelligent monitoring systems that provide real-time insights into power usage and distribution. This allows system administrators to monitor the performance remotely, ensuring that any potential issues can be addressed promptly before they escalate into more significant problems.

Another prominent characteristic of these power distribution units is their high level of protection. They come with built-in surge suppression and fault protection, safeguarding critical equipment against power surges and electrical faults. This feature is especially vital in environments where sensitive electronic components are in operation.

Moreover, the APC ACSC series incorporates energy-efficient designs. These models comply with various industry standards aimed at reducing energy consumption while maximizing output, contributing to a lower carbon footprint. Their efficiency not only helps in cutting operational costs but also aligns with sustainability goals that many organizations are striving to achieve.

User-friendly interfaces are a highlight of the ACSC100 and ACSC101. They feature intuitive LCD screens that simplify configuration and monitoring processes. This ease of use reduces the likelihood of human error during setup and operation, making them accessible even for those with limited technical expertise.

In summary, the APC ACSC100 and ACSC101 are cutting-edge power distribution solutions built for reliability, efficiency, and protection. Their modular design, advanced monitoring technology, robust safety features, energy efficiency, and user-friendly interface make them ideal choices for businesses seeking dependable power management systems in critical environments. With these models, organizations can ensure that their electronic assets are well-protected and efficiently managed, leading to enhanced operational continuity.

APC ACSC101, ACSC100 manual Threshlds screen

Models: ACSC101 ACSC100

Displayed Alarm Message

Threshlds screen.

• Make sure the Rack Inlet High Temperature Threshold is set

ACSC101, ACSC100 specifications