Control console
After you log on at the control console, as described in “Local access to the control console” on page 8 or “Remote access to the control console” on page 9:
1.Choose Network from the Control Console menu.
2.Choose TCP/IP from the Network menu.
3.If you are not using a BOOTP or DHCP server to configure the TCP/IP settings, select the Boot Mode menu. Select Manual boot mode, and then press ESC to return to the TCP/IP menu. (Changes will take effect when you log out).
4.Set the System IP, Subnet Mask, and Default Gateway address values.
5.Press CTRL+C to exit to the Control Console menu.
6.Log out (option 4 in the Control Console menu).
Note: If you disconnected a cable during the procedure described in “Local access to the control console” on page 8, reconnect that cable and restart the associated service.
10 | Automatic Transfer |
