APC AP8959NA3 Control the agent’s rebooting behavior, GUIDEBase, REFERENCEInformationManagement

GUIDEBase

REFERENCEInformationManagement

®

• Configure the date and time on a Management Card or other device.

mconfigBOOTPEnabled mconfigNumTrapReceivers {mconfigTrapReceiverTable}

[mconfigTrapReceiverEntry] trapIndex receiverAddr communityString

severity (obsolete: always returns 0) acceptThisReceiver receiveTrapType (obsolete: always returns 1)

mconfigClock mconfigClockDate mconfigClockTime

Control the agent’s rebooting behavior

Use the one [mcontrol] OID to control when a Network Management Card or network- enabled device reboots and whether basic network settings or agent code are changed. No reboot occurs if a user is logged on to the Management Card or device.

mcontrolRestartAgent

Use the available values described in the MIB file to do any of the following:

•Reboot the Management Card or device now.

•Download new agent code (if available) and reboot the Management Card or device.

•Reset basic TCP/IP settings of the Management Card or device to their defaults (optionally including the resetting of its boot mode to DHCP and BOOTP) and perform a reboot.

Value 3 now applies to the Network Management Card and to other APC network-enabled devices. The three PowerNet adapters mentioned in the description in the MIB file for value 3 are not longer sold by APC.

Value 4 is now obsolete.

7