APC AP8959NA3 manual Tabled OIDs, GUIDEBase, REFERENCEInformationManagement

GUIDEBase

REFERENCEInformationManagement

®

There are three categories under [products]:

•[hardware] contains sub-categories for each type of hardware product that you can manage using PowerNet MIB OIDs.

•[software] contains one sub-category, [powerNetSubAgent], of read-only OIDs to monitor a software PowerNet agent only.

See Manage Agents and Management Cards.

•[system] contains read-only OIDs that identify models of APC UPSs and other APC devices by unique numbers that other OIDs can reference. For example, the system OIDs in other OID categories of the PowerNet MIB use a PowerNet MIB [system] OID number for the MIB-II’s [sysObjectID] value.

Tabled OIDs

For any PowerNet MIB OID category listed in the SNMP browser, you can access a list of the current values for all OIDs in that category and in all sub-categories below it in the hierarchy, except OIDs grouped in a table. To access the current values of OIDs in an OID table, select the OID table (always enclosed in braces {}) in the SNMP browser. For example, to access the OIDs that define all four trap receivers that you can configure through SNMP for a device, select {mconfigTrapReceiverTable} in the SNMP browser.

4