APC AP8959NA3 manual Manage an SNMP Agent of a Hardware Device, View information about an agent

GUIDEBase

REFERENCEInformationManagement

®

View information about an agent

Use the [powerNetSoftwareSystem] OIDs to view information about the agent, including its version number, the technology that it uses to implement the PowerNet MIB, and the length of time it has been running continuously on the network.

powerNetSoftwareSystemDescription powerNetSoftwareOid powerNetSoftwareSystemUpTime

View information about an agent’s software modules

Use the [powerNetSoftwareConfig] tabled OIDs to view the version number, name, and installation date (in the format mm-dd-yy) of any of the agent’s software modules.

powerNetSoftwareTableSize {powerNetSoftwareTable}

[powerNetSoftwareEntry] moduleNumber moduleName moduleVersion moduleDate

Manage an SNMP Agent of a Hardware Device

Use the [apcmgmt] OIDs to manage the SNMP agent of an APC hardware device, such as the Network Management Card (installed, pre-installed, or embedded) of a UPS or other APC device. The [apcmgmt] OIDs are in four subcategories: [mconfig], [mcontrol], [mtrapargs], and [mfiletransfer].

View BOOTP value; set trap receivers, date, and time

Use the [mconfig] OIDs to perform the following tasks:

•Identify whether BOOTP is enabled (so that BOOTP provides the device’s IP configuration) or disabled (so that the device uses its stored IP configuration).

•Configure up to four NMSs as trap receivers as described in How To Define Trap Receivers.

6