Oki 7100e+ manual For resetting the network print server to factory default

Please select(1 - 2)? _1 [prn1]

Ready

Please select(1 - 2)? _2 [system]

MLETB07 Version 1.0.0 TCP/IP status

IP address : 192.168.20.127

Subnet Mask : 255.255.255.0

Gateway addr : 192.168.20.254 NetWare status

NWPrint mode : Failed EtherTalk status Zone Name : *

Type Name : LaserWriter

Object Name : ML0011BC

97:For resetting the network print server to factory default.

98:For returning to the previous screen without changing network print server settings.

99:For returning to the previous screen after changing network print server settings.

TCP/IP setup screen

Select [1] on the Main Screen to display this screen. Configure if using TCP/IP.

Please select (1-99)? _1
No.		Message		Value
1	: TCP/IP protocol		: ENABLE
2	: IP address		: 192.168.20.127
3	: Subnet mask		: 255.255.255.0
4	: Gateway address		: 192.168.20.254
5	: RARP protocol			: DISABLE
6	: DHCP/BOOTP protocol			: DISABLE
7	: ROOT password			: “”
99 :		Back to prior menu
Please select (1 - 99)? _

SNMP setup screen

Select [2] on the Main Screen to display this screen. Configure if using SNMP.

Please select (1-99)? _2
No.		Message	Value
1	: Authentic community		:”******”
2	: Trap community		:”public”
3	: Trap address		:0.0.0.0
4	: SysContact		:””
5	: SysName		:””
6	: SysLocation		:””

22 Network print server