Network print server Status Lights, Stat Light red LED | Oki 7100e+

Network print server Status Lights

Three status lights (LED’s) on the network print server card indicate print server status for troubleshooting.

STAT Light (red LED)

Flashes when the NETWORK PRINT SERVER receives data. If the NETWORK PRINT SERVER detects an abnormality, the STAT LED performs one of the following:

•Flashes at fixed intervals

•Stays on

•Stays off.

Turn the machine off and then on to reset the error condition. If this does not work, then do the self diagnostics test.

LINK 100M Light (green LED, center)

Lights when the NETWORK PRINT SERVER is connected using 100BASE-TX.

LINK 10M Light (green LED, near cable)

Lights when the NETWORK PRINT SERVER is connected using 10BASE-T.

User’s Guide: English 47

Image 47

Oki 7100e+ manual Network print server Status Lights, Stat Light red LED

Contents

59324102 User’s Guide Network print server Contents Novell NetWare TroubleshootingSpecifications Index Adapter Card IntroductionComponents Network print server OKI Print Monitor Utility HP JetAdmin and Web JetAdmin Support Network print server Installation Network print server Stat Light red LED 100BASE-TX/10BASE-T ConnectorNetwork Print Server Part Names Link 10M Light green LED, near cable Link 100M Light green LED, center Setting Up the Network Print Server Using Okiview Network Print Server Configuration Network Properties Okiview 32 Printer PanelOkiview 32 Printer Properties Menu Status Changing the Printerís Name and Location Novell ConfigurationNovell List Panel Novell Information Panel PressMENU/EXIT IP Address SetupRepeat for 84SUBNET Mask and 85DEFAULT Using the Network print server Web T p / / 1 9 3 3 2 Print Server Mode SettingsTCP/IP Settings NetWare Settings EtherTalk Settings File Servers per Pserver ModeNetBEUI Settings Printer Menu Connecting Using TCP/IPSnmp Settings MIB-II Category Arp -s 192.168.20.127 0080920011BC temp Using TelnetConnecting One Printer and One Computer Printer Address Subnet Mask Settings Main screen Snmp setup screen TCP/IP setup screenDHCP/BOOTP protocol Root password Back to prior menu Please select 1 99? Please select 1-99? Message Value NetWare protocol NetWare setup screenPacket type 802.3 NetWare mode NetWare print server mode setup screen Zone Name Back to prior menu Please select 1 99? Message Value Pserver name Job timeout Back to prior menuPlease select 1-99? Message Value EtherTalk protocol Trap type Resetting the fax machinePrinter trap setup screen Please select 1-99? Message Value Trap enable Add Printer Driver Windows PrintingOverview Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Printer Selection Pop-Up MonitorTask Tray Always display on top Monitor Screen Status Monitoring Setup Dialog Pop-Up Conditions Display User’s Guide English Introduction Print Server ModeRemote Printer Mode Novell NetWare Click Novell Setting up the Network Print Server UsingBindery Printing Verifying that the Printer is Connected Novell Directory Services NDSSetting up the Network Print Server using Okiview Click OK. Then Click OK in the Printer Properties Click Change ContextClick OK Click Add/Delete Queue Add Printer Wizard will start Novell Distributed Print Services NdpsSetting up the Clients Fax machine does not print via lpr or ftp TroubleshootingFax machine cannot find the network print server User name in banner Problems printing via NetWare Fax machine does not print If NIC Check is marked with NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If the Eeprom check result is NG Network print server Status Lights Functions SpecificationsNetwork Interface Network Protocol Index Network print server