Oki 7100e+ Note EtherTalk settings are not supported by the fax machine, Remote Printer Mode

NDS

Tree Name–In print server mode, enter the name of the tree in which the file server is located. Maximum length: 31 characters.

Context–In print server mode, enter the name of the context in which the Print Server was created. Maximum length: 77 characters. For example, LAB.OKI. Field is case sensitive!

File Servers per Pserver Mode

File Server Name–Enter the name of the file server controlling the NETWORK PRINT SERVER in print server mode. A maximum of eight file servers may be designated. Maximum length: 31 characters.

Remote Printer Mode

Printer Name for R-Printer Mode–Enter the printer name stored on the print server in remote printer mode. Make sure that this name is identical to the “Printer Name” stored on the print server. Maximum length: 31 characters.

Job Timeout–This is the time from receiving the last print packet to releasing the NETWORK PRINT SERVER port at the end of the print job, in remote printer mode. If the

set value is too low, any packet delay may stop printing part way through. The default value should normally be used. The setting may be between 4 - 255 seconds.

Print Server Name–Enter the print server name controlling the network print server in remote printer mode. A maximum of eight print servers may be designated. Maximum length: 31 characters.

NetBEUI Settings

Computer Name–Enter the name of the computer. Maximum length: 15 characters.

Workgroup Name–Enter the name of the workgroup. Maximum length: 15 characters.

Comment–Enter user information relating to the computer. Maximum length: 48 characters.

EtherTalk Settings

Note: EtherTalk settings are not supported by the fax machine.

EtherTalk Zone Name–Enter the new zone name if you change the zone to which your printer belongs.

EtherTalk Printer Name–Enter the new printer name if you change the printer name used by Chooser. Maximum length: 31 characters.

18 Network print server