Oki 7100e+ Problems printing self diagnostics test and configuration, Fax machine does not print

Problems printing self diagnostics test and configuration

Fax machine does not print

•Check that DIP switches 3 (configuration printing) and 4

(self-diagnostics testing) have been turned on. Turn the fax machine off before changing the DIP switch settings.

•If the fax machine is on-line, turn the power switch off and then on.

NG printed in self-diagnostics test results

If the ROM check or RAM check result is NG (no good).

•After checking that the network print server is installed correctly, switch the fax machine off and then on.

If the EEPROM check result is NG.

•After checking that the network print server is installed correctly, switch the fax machine off and then on.

•Turn DIP switch 2 to the ON position to initialize the network print server print server. Retest after resetting.

If NIC Check is marked with NG.

•After checking that the network print server is installed correctly, switch the fax machine off and then on.

•Check that the network cable is properly connected. Try connecting the fax machine to a network in another segment if possible. Also, try another cable.

If the fax machine prints a different network format from that of the network to which it is connected.

•After checking that the network cable is properly connected, switch the fax machine off and then on.

•Replace the network cable connected to the fax machine and switch the fax machine off and then on.

46 Network print server