User’s Guide English | Oki 7100e+ specification

The item Always display on top is linked to Always display on top in the View menu of the monitor screen (see “Monitor Screen” above). If you check this item, the Pop-Up Monitor always displays on top of all other windows.

If you check Start up as icon, Pop-Up Monitor starts up as an icon in the task tray when it is launched, and the monitor screen does not display automatically.

If you check Display print status bar, the print job status is shown on the monitor screen.

The Please set the interval to refresh item, designates how often the monitor retrieves and displays the status of your printer. The default is 1000ms (1 second).

User’s Guide: English 37

Image 37

Oki 7100e+ manual User’s Guide English

Contents

59324102 User’s Guide Network print server Contents Specifications Index TroubleshootingNovell NetWare Components IntroductionNetwork print server Adapter Card OKI Print Monitor Utility HP JetAdmin and Web JetAdmin Support Network print server Installation Network print server Network Print Server Part Names 100BASE-TX/10BASE-T ConnectorStat Light red LED Link 10M Light green LED, near cable Link 100M Light green LED, center Setting Up the Network Print Server Using Okiview Network Print Server Configuration Okiview 32 Printer Properties Menu Okiview 32 Printer PanelStatus Network Properties Novell List Panel Novell ConfigurationNovell Information Panel Changing the Printerís Name and Location Repeat for 84SUBNET Mask and 85DEFAULT IP Address SetupPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 TCP/IP Settings SettingsNetWare Settings Print Server Mode NetBEUI Settings File Servers per Pserver ModeEtherTalk Settings Snmp Settings Connecting Using TCP/IPMIB-II Category Printer Menu Connecting One Printer and One Computer Using TelnetPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC temp Settings Main screen DHCP/BOOTP protocol TCP/IP setup screenRoot password Back to prior menu Please select 1 99? Snmp setup screen Packet type 802.3 NetWare mode NetWare setup screenNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocol Please select 1-99? Message Value EtherTalk protocol Message Value Pserver name Job timeout Back to prior menuZone Name Back to prior menu Please select 1 99? Printer trap setup screen Resetting the fax machinePlease select 1-99? Message Value Trap enable Trap type Overview Windows PrintingAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Task Tray Pop-Up MonitorPrinter Selection Always display on top Monitor Screen Status Monitoring Setup Dialog Pop-Up Conditions Display User’s Guide English Remote Printer Mode Print Server ModeNovell NetWare Introduction Bindery Printing Setting up the Network Print Server UsingClick Novell Setting up the Network Print Server using Okiview Novell Directory Services NDSVerifying that the Printer is Connected Click OK Click Change ContextClick Add/Delete Queue Click OK. Then Click OK in the Printer Properties Setting up the Clients Novell Distributed Print Services NdpsAdd Printer Wizard will start Fax machine cannot find the network print server TroubleshootingFax machine does not print via lpr or ftp User name in banner Problems printing via NetWare Fax machine does not print If the ROM check or RAM check result is NG no good Problems printing self diagnostics test and configurationIf the Eeprom check result is NG If NIC Check is marked with NG Network print server Status Lights Network Interface SpecificationsNetwork Protocol Functions Index Network print server