The fax machine is recognized by utility but cannot establish connection with NetWare server
Remote printer mode
•Check that the print server for which the unit has been registered has been started up.
•Check that the correct print server name has been selected. Check that the name of the print server operating on the file server is the same as the print server name set on the fax machine’s print server.
•Check that the correct NetWare port name has been selected. Check that the fax machine name (shown on the print server monitor of the file server) is the same as the NetWare port name set on the print server card in the fax machine. If there are several network print servers, set the NetWare port names so that they are different from each other.
Print server mode
•Check to see that the network print server is logged onto the NetWare server.
•Make sure that the correct file server name has been selected. Check that the file server name you use is the same as the file server name selected for the network print server.
•Make sure that the correct NetWare port name has been selected. Check that the fax machine name set on the file server is the same as the NetWare port name set on the network print server. If there are several network print servers, set the NetWare port names so that they are different from each other.
•Check that the NetWare login password matches the set password.
•Check that the machine name for the network print server is the same as the print server name set on the file server.
Fax machine does not print
•Make sure that the network cable is properly connected. Replace it if necessary.
•Make sure that the fax machine is switched on. If it is on, switch it off and then on.
