Network print server | Oki 7100e+ specs

2Connect the Network print server (4) to the adapter card (5), then mount into the fax machine.

3Re-attach the rear plate:

a.Attach the rear plate, and fasten it with two screws (7).

b.Fasten the adapter card with two screws (8).

c.Fasten the Network print server with two screws (9).

2		9
		9
5
		7
7	9	8
	9	8

8 Network print server

Page 8

Image 8

Contents

User’s Guide 59324102 Network print server Contents Novell NetWare TroubleshootingSpecifications Index Introduction ComponentsNetwork print server Adapter Card HP JetAdmin and Web JetAdmin Support OKI Print Monitor Utility Network print server Installation Network print server Stat Light red LED 100BASE-TX/10BASE-T ConnectorNetwork Print Server Part Names Link 100M Light green LED, center Link 10M Light green LED, near cable Network Print Server Configuration Setting Up the Network Print Server Using Okiview Okiview 32 Printer Panel Okiview 32 Printer Properties MenuStatus Network Properties Novell Configuration Novell List PanelNovell Information Panel Changing the Printerís Name and Location PressMENU/EXIT IP Address SetupRepeat for 84SUBNET Mask and 85DEFAULT Using the Network print server Web T p / / 1 9 3 3 2 Settings TCP/IP SettingsNetWare Settings Print Server Mode EtherTalk Settings File Servers per Pserver ModeNetBEUI Settings Connecting Using TCP/IP Snmp SettingsMIB-II Category Printer Menu Using Telnet Connecting One Printer and One ComputerPrinter Address Subnet Mask Arp -s 192.168.20.127 0080920011BC temp Settings Main screen TCP/IP setup screen DHCP/BOOTP protocolRoot password Back to prior menu Please select 1 99? Snmp setup screen NetWare setup screen Packet type 802.3 NetWare modeNetWare print server mode setup screen Please select 1-99? Message Value NetWare protocol Zone Name Back to prior menu Please select 1 99? Message Value Pserver name Job timeout Back to prior menuPlease select 1-99? Message Value EtherTalk protocol Resetting the fax machine Printer trap setup screenPlease select 1-99? Message Value Trap enable Trap type Add Printer Driver Windows PrintingOverview Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Printer Selection Pop-Up MonitorTask Tray Monitor Screen Always display on top Setup Dialog Status Monitoring Pop-Up Conditions Display User’s Guide English Print Server Mode Remote Printer ModeNovell NetWare Introduction Click Novell Setting up the Network Print Server UsingBindery Printing Verifying that the Printer is Connected Novell Directory Services NDSSetting up the Network Print Server using Okiview Click Change Context Click OKClick Add/Delete Queue Click OK. Then Click OK in the Printer Properties Add Printer Wizard will start Novell Distributed Print Services NdpsSetting up the Clients Fax machine does not print via lpr or ftp TroubleshootingFax machine cannot find the network print server Problems printing via NetWare User name in banner Fax machine does not print Problems printing self diagnostics test and configuration If the ROM check or RAM check result is NG no goodIf the Eeprom check result is NG If NIC Check is marked with NG Network print server Status Lights Specifications Network InterfaceNetwork Protocol Functions Index Network print server

Oki 7100e+ manual Network print server

Models: 7100e+

8 Network print server