Windows Printing

Overview

This section contains instructions on how to set up your Network print server for a Microsoft Networking environment. To print from a Windows 95/98, Windows NT Server 4.0 or Windows NT Workstation 4.0 (hereafter, Windows NT4.0) TCP/IP network, you must set up both the network print server

!Service Pack 3 or higher is required for proper operation in Windows NT. Service packs should be installed by a network administrator.

!The Network Print Driver does not support the “EtherTalk Printing Devices” option.

To print by TCP/IP with your NETWORK PRINT SERVER in Windows, use OKI Print Monitor included in the Software Utilities CD-ROM. OKI Print Monitor provides you with bi- directional communication to your NETWORK PRINT SERVER print server. Since OKI Print Monitor creates a Windows NT Custom Printing Port, you do not have to load Microsoftís Optional TCP/IP Printing Services onto every Windows NT Workstation.

Add Printer Driver

1Insert the Network print server Software Utilities CD-ROM into your CD-ROM drive.

The installer screen displays.

2Click Printer Driver. Follow the online instructions for installing the driver in either a Windows 95/98 or Windows NT environment.

When designating your printer driver through Settings, Printers, examine the Printer Properties, Ports tab to confirm that your printer is connected to the proper driver.

26 Network print server

Page 26
Image 26
Oki 7100e+ manual Windows Printing, Overview, Add Printer Driver