Link 100M Light green LED, center | Oki 7100e+ manual

LINK 100M Light (green LED, center)

Lights when the network print server is connected using 100BASE-TX.

LINK 10M Light (green LED, near cable)

Lights when the network print server is connected using 10BASE-T.

See the Troubleshooting section in this guide for more details.

10 Network print server

Image 10

Oki 7100e+ manual Link 100M Light green LED, center, Link 10M Light green LED, near cable

Contents

User’s Guide 59324102 Network print server Contents Specifications Index TroubleshootingNovell NetWare Network print server IntroductionComponents Adapter Card HP JetAdmin and Web JetAdmin Support OKI Print Monitor Utility Network print server Installation Network print server Network Print Server Part Names 100BASE-TX/10BASE-T ConnectorStat Light red LED Link 100M Light green LED, center Link 10M Light green LED, near cable Network Print Server Configuration Setting Up the Network Print Server Using Okiview Status Okiview 32 Printer PanelOkiview 32 Printer Properties Menu Network Properties Novell Information Panel Novell ConfigurationNovell List Panel Changing the Printerís Name and Location Repeat for 84SUBNET Mask and 85DEFAULT IP Address SetupPressMENU/EXIT Using the Network print server Web T p / / 1 9 3 3 2 NetWare Settings SettingsTCP/IP Settings Print Server Mode NetBEUI Settings File Servers per Pserver ModeEtherTalk Settings MIB-II Category Connecting Using TCP/IPSnmp Settings Printer Menu Printer Address Subnet Mask Using TelnetConnecting One Printer and One Computer Arp -s 192.168.20.127 0080920011BC temp Settings Main screen Root password Back to prior menu Please select 1 99? TCP/IP setup screenDHCP/BOOTP protocol Snmp setup screen NetWare print server mode setup screen NetWare setup screenPacket type 802.3 NetWare mode Please select 1-99? Message Value NetWare protocol Please select 1-99? Message Value EtherTalk protocol Message Value Pserver name Job timeout Back to prior menuZone Name Back to prior menu Please select 1 99? Please select 1-99? Message Value Trap enable Resetting the fax machinePrinter trap setup screen Trap type Overview Windows PrintingAdd Printer Driver Network Print Server Setup for Windows Network print server User’s Guide English Network print server Add the LPR Port Network print server Task Tray Pop-Up MonitorPrinter Selection Monitor Screen Always display on top Setup Dialog Status Monitoring Pop-Up Conditions Display User’s Guide English Novell NetWare Print Server ModeRemote Printer Mode Introduction Bindery Printing Setting up the Network Print Server UsingClick Novell Setting up the Network Print Server using Okiview Novell Directory Services NDSVerifying that the Printer is Connected Click Add/Delete Queue Click Change ContextClick OK Click OK. Then Click OK in the Printer Properties Setting up the Clients Novell Distributed Print Services NdpsAdd Printer Wizard will start Fax machine cannot find the network print server TroubleshootingFax machine does not print via lpr or ftp Problems printing via NetWare User name in banner Fax machine does not print If the Eeprom check result is NG Problems printing self diagnostics test and configurationIf the ROM check or RAM check result is NG no good If NIC Check is marked with NG Network print server Status Lights Network Protocol SpecificationsNetwork Interface Functions Index Network print server