Warnings and System Faults

Audible Warnings

Four Beeps Every 30 Seconds

Back-UPS is running on battery. You should consider saving any work in progress.

Continuous Beeping

Low battery condition and battery run-time is very low. Promptly save any work in progress, exit

 

all open applications, and shut down the operating system.

Continuous tone

Battery Backup outputs are overloaded.

Chirps for 1 Minute every 5 hours

Battery fails the automatic diagnostic test and should be replaced.

Warning Icons

 

 

If these icons are

This may be the problem.

illuminated...

 

 

 

The Back-UPS is operating on utility power, but is overloaded. Disconnect one of the items connected to the Back-UPS. If the Overload icon stops flashing, the Back-UPS is no longer overloaded and will continue to operate normally.

The Back-UPS is operating on battery power, but is overloaded. Disconnect one of the items connected to the Back-UPS. If the Overload icon stops flashing, the Back-UPS is no longer overloaded and will continue to operate normally.

The Back-UPS is operating on utility power, but the battery is not functioning properly. Contact APC

Customer Service to order a replacement battery. See “Replacement Battery” on page 8.

The Back-UPS is operating on battery power and the battery power is getting low. Shut down all connected equipment to avoid losing an unsaved data. When possible, connect the Back-UPS to utility power to recharge the batter.

System Faults

The Back-UPS will display these fault messages. For faults F01 and F02, contact APC Technical Support.

F01

On-Battery Overload

Turn the Back-UPS off. Disconnect non-essential

 

 

equipment from the Battery Backup outlets and the turn

 

 

Back-UPS on.

F02

On-Battery Output Short

Turn the Back-UPS off. Disconnect non-essential

 

 

equipment from the Battery Backup outlets and the turn

 

 

Back-UPS on.

bu088a

F03 On-Battery Xcap Overload

F04 Clamp Short

F05 Charge Fault

F06 Relay Welding

F07 Temperature

F08 Fan Fault

F09 Internal Fault

Faults F03-F09 cannot be corrected by the user, contact APC Technical Support for assistance.

Back-UPS® Pro Installation and Operation

5

Page 5
Image 5
APC BR1300G, BR1500G Audible Warnings, System Faults, If these icons are This may be the problem Illuminated, F01, F02

BR1500G, BR1300G, 1300 specifications

The APC 1300, BR1300G, and BR1500G are part of the APC Back-UPS series, designed to provide reliable backup power and surge protection for a variety of electronic devices. These uninterruptible power supplies (UPS) are essential for ensuring continuous operation in situations where power interruptions can lead to data loss or equipment damage.

Starting with the APC 1300, this model offers a compact design while delivering 1300 VA of power. Its internal battery provides ample run-time for critical devices, ensuring that users can save their work and safely shut down equipment during a power failure. The LCD display provides real-time information on power status, battery level, and load capacity, allowing for easy monitoring.

Next, the BR1300G enhances the capabilities of the APC series with its features tailored for home and small office environments. Delivering 1300 VA of power, it also incorporates Automatic Voltage Regulation (AVR) technology, which corrects minor voltage fluctuations without using the battery, improving battery life and ensuring consistent power delivery. The BR1300G is equipped with multiple outlets, allowing users to connect various devices, and features USB connectivity for easy management and monitoring via compatible software.

The BR1500G represents a more advanced option, providing 1500 VA of power. This model also incorporates AVR technology and offers enhanced run-time, making it suitable for larger systems. Its LCD panel provides a comprehensive overview of the UPS status, while the energy-efficient design ensures reduced power consumption. The BR1500G also boasts additional outlets, including a few which are specifically designed for high-voltage devices, making it an ideal choice for small to medium-sized businesses.

All three models feature an intuitive interface, ensuring ease of use for individuals unfamiliar with UPS systems. They are built with high-quality components that provide robust protection against power surges and spikes, which can otherwise lead to equipment damage. Moreover, the compact form factor of each UPS allows for flexible placement within any environment.

In summary, the APC 1300, BR1300G, and BR1500G deliver essential backup power solutions with advanced features and robust technologies. Their impressive specifications make them versatile options for both home and business users seeking to protect their valuable electronic devices from unforeseen power issues.