APC SMT1500, SUM1500RMXL2U Configuration, UPS Settings, Start-up Settings, General Settings

Configuration

UPS Settings

Start-up Settings

Configure these settings at initial start-up, using the display interface or APC PowerChute® software.

Note: During start-up, use the display interface to configure these settings. If nothing is selected, the until will use the default settings.

Function	Factory Default	Options	Description
Language	English	• English	The language for the display interface.
		• French*	*Language options will vary by model.
		• German*
		• Spanish*
		• Italian*
Local Power	Good	• Good	Select the quality of input utility power.
Quality		• Fair	• If Good is selected, the unit will go on battery
		• Poor	power more often to provide the cleanest power
			supply to the connected equipment.
			• If Poor is selected, the UPS will tolerate more
			fluctuations in power and will go on battery power
			less often.
			If unsure of the local power quality, select Good.
Menu Type	Standard	Standard or	The advanced menus include all parameters. The
		Advanced	Standard menus display a limited set of menus and
			options.
Display	Always On	Always On or	The display may be always on or may be set to
Mode		Power Saving	automatically turn on only when using the
			configuration buttons or if an event occurs.

General Settings

Configure these settings at any time, using the display interface or APC PowerChute® software.

Function Factory Default Options Description

High Transfer	120	V:	• 127 Vac
Point	127	Vac	• 130 Vac
			• 133 Vac
			• 136 Vac
	230	V:	• 253 Vac
	253	Vac	• 257 Vac
			• 261 Vac
			• 265 Vac

To avoid unnecessary battery usage, set the transfer point higher if the utility voltage is chronically high and the connected equipment is known to work under this condition. The POWER QUALITY setting will automatically change this setting.

Note: Use the Advanced Menus to configure this setting.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower 7