APC SMT 3000I, SMT3000RMI2U, SMT 3000 VA, 120VAC, 230 Vac, SMT 2200 VA manual Safety, Inventory

Installation Guide SMT 2200/3000 VA Input/Output Hardwire Kit

Safety

Adhere to all national and local electrical codes. A certified electrician must perform all electrical connections.

1.Disconnect equipment connected to the UPS.

2.Press the OFF button located on the front of the UPS.

3.Disconnect the batteries in the UPS.

4.Disconnect the UPS from utility power.

NOTE: When removing the panels from the UPS, note which cable is connected to the AC input. There are two 4-pin connectors on the UPS and they are not interchangeable.

Inventory

Note: The illustrations in this document may differ slightly from the actual hardware.

Terminal block Terminal block label 2 screws secure the terminal block to the UPS

4 grounding screws

8 screws

secure input, output, and blank panels to the UPS

2 wire nuts

Input panel Output panel Blank panel