Installation
Note: It is recommended that the input and output cables be connected to the terminal block prior to installing the terminal block in the UPS.
Remove the five screws that secure the factory installed PDU panels to the UPS.
Save the screws.
Disconnect the PDU input and output cables as shown in the diagram.
AC Input Connector
su0669b
Secure the replacement input and output panels (supplied), to the UPS. Secure the panels with four of the screws removed from the factory installed PDU panel.
Install appropriate strain relief clamps (not supplied), to the input and output panels as shown in the diagram.
su0670a
2 | Hardwire Kit SMT2200/3000 VA 100/120/230 VAC Tower |