REPLACING THE BATTERY MODULE

To replace the battery module, reverse the directions above for Removing the Front Bezel and Bat- tery Module.

Disconnecting the Battery for Transport

Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) regulations.

The battery may remain in the UPS; it does not have to be removed.

1.Shut down and disconnect any equipment attached to the UPS.

2.Shut down and disconnect the UPS from the power supply.

3.Unplug the battery connector (rear panel).

For shipping instructions and to obtain appropriate packing materials contact APC at the web site, www.apc.com/support/contact.

10

Page 12
Image 12
APC UPS user manual Disconnecting the Battery for Transport