UTS Controls and Indicators
The UTS controls and indicators are located on the front of the UTS.
bu163a
| Control or Indicator | Description |
|
|
|
| LCD | • Displays two lines with 20 characters per line |
|
| • Displays UTS status, warnings, general information |
|
| • Displays the value or setting that is being entered or changed during |
|
| configuration and setup |
|
|
|
| System Status button | Cycles the UTS through the default or selected system status options |
|
|
|
| System Setup button | Used to configure the UTS system options |
|
|
|
| Circuit Status button | Cycles the UTS through the circuits displaying the status of each on the LCD |
|
|
|
| Circuit Setup button | Used to configure the UTS individual circuit options |
|
|
|
| Down/Up arrow buttons | Used to scroll through steps for configuration and to scroll between status and |
|
| informational displays |
|
|
|
| Source LEDs | • Solid green LED illumination indicates that the power source is ON and is |
| Utility | functioning normally |
| Generator | • No LED illumination indicates that the power source is OFF or is outside |
| specified limits | |
| UPS | |
| • A flashing green LED indicates that a fault condition exists for that power | |
|
| |
|
| source, and should be corrected |
|
|
|
| Circuit LEDs | The number of circuit LEDs varies dependent on the model of UTS |
|
| • Red LED illumination indicates that the UTS circuit is receiving power from |
|
| one of the power sources |
|
| • No illumination indicates that circuit is receiving no power |
|
| • A flashing red LED indicates that a fault condition exists and should be |
|
| corrected |
|
|
|
4 | Operation Manual Universal Transfer Switch UTS6 UTS6H UTS6BI UTS10BI |
