Why is there no sound from the rear channels?
Make sure the speakers are attached to the rear channel outputs, and your receiver is in surround sound mode. A simple test for correct
Note: In general, when watching movies, the amount of sound coming from the rear speakers is much less than that coming from the front and center speakers. When listening to music in stereo the rear speakers will not be activated.
Why is there no sound from the center speaker?
In order to get center channel output, your receiver must be in Pro Logic, or Dolby Digital surround mode and the program source must be in a surround format. Use the Dolby test tone function mentioned above to check the
Why am I getting ONLY center channel output from TV broadcast or videotape?
The station is broadcasting in Mono, not Stereo. If you're playing a videotape and get only the center channel, the movie is not in stereo and/or you have a Mono VCR. You need a stereo VCR to get surround sound from prerecorded tapes. Rental tapes of movies that have been in circulation for months may have poor sound quality.
How can I turn the speakers on my TV on and off?
Most TVs have a switch on the back panel, or an
Resources
Call us at
18