Aperion Audio SW8-APR, SW-12 owner manual Low Level Sub Output, is more complicated than a stereo

5.1 Home Theater Connection - Low Level Sub Output

Left Front			Center			Right Front
				- +
- +						-	+
	Front			Rear
	L	R		L	R
	- +	- +	- +	- +	- +
			Center		Sub
Left Surround	A/V Receiver				Out	Right Surround
	Processor/Amplifier
- +						-	+
Low Level Sub Output						SW-12 Amplifier Shown
While setting up a home theater system
is more complicated than a stereo
system, it doesn’t have to be difficult.
Please refer to the diagram on this page
for complete speaker wiring instructions.

If your receiver does have a “sub out” connection, you will need an RCA terminated interconnect cable to connect the receiver to the subwoofer.

NOTE: Your subwoofer is supplied with two low-level inputs (L&R), but if your receiver or processor has a single sub- out connector, connect it to the input labeled “5.1 sub input” or you can use a “y” plug to connect to both the left and right inputs. We recommend use of a “y” plug which will give you a +3dB boost in output.

11