Apple 2500 important safety instructions Everything prints backwards, There are watermark problems

Text lines up in columns on the screen but not when it prints

You may have used spaces (rather than tabs) to line up the text. Because printers interpret spaces differently than the screen does, the text may fail to line up when you print it. Try replacing the spaces with tabs.

You can also make columns by using spaces with a monospace font—such as Courier or Monaco—instead of tabs. A monospace font is one in which every character has the same width.

Everything prints backwards

Choose the Print command and check what paper type you’ve selected in the dialog box that opens. If you indicate that you’re printing on back-print film, the printer reverses the image.

There are watermark problems

The wrong watermark printed.

If you selected one watermark, but a different one printed, you can fix it by changing the modification date and time of one of the watermark files. To change the modification date, open one of the files, then save it using the Save As command. (The watermark files are stored in the Printing Prefs folder, which is in the Preferences folder inside the System Folder.) When asked if you want to replace the file, say yes.

I created a new watermark, but it doesn’t show up in the dialog box.

mMake sure the watermark was saved as a PICT or PICT2 file.

mMake sure the file was saved in the Printing Prefs folder, which is in the Preferences folder inside the System Folder.

Troubleshooting 81