mDon’t use devices that produce open flames, such as Bunsen burners, near
the printer.
mDon’t use alcohol-based or ammonia-based cleaners on or around the
printer.
mAlways unplug the printer before cleaning it. (Use only the cleaning
procedure recommended in Chapter 4.)
mClean the outside of the printer with only a damp cloth and, if necessary, a
mild soap or detergent. Be careful not to get liquid into the printer or the
power cord receptacle.
IMPORTANT
The only way to disconnect power completely is to unplug the
power cord. Make sure at least one end of the power cord is within easy reach
so that you can unplug the Color StyleWriter 2500 when you need to.
Watch f or th ese situations, and if one occurs pull the plug!
mthe power cord or plug becomes frayed or otherwise damaged
myou spill something into the printer
mthe printer is exposed to rain or any other excess moisture
mthe printer has been dropped or otherwise damaged
myou suspect that your printer needs service or repair
WARNING
Electrical equipment may be hazardous if misused. Operation
of this product, or similar products, must always be supervised by an
adult. Do not allow children access to the interior of any electrical
product and do not permit them to handle any cables.
2Chapter 1