Take Apart

Display Assembly - 19

 

 

 

Interconnect-to-Logic

Board Cable

Caution: Support the display assembly from beneath before removing it.

1Open the unit and rotate the display assembly as far back as it will go.

2Disconnect the interconnect-to-logic- board cable.

3Using a T-8 torx driver, remove the two display mounting screws.

4Slide the display assembly to the left so that the right clutch clears the loop of the

Page 81 Page 83
Page 82
Image 82
Apple 540C, 520C manual Interconnect-to-Logic Board Cable
Page 81 Page 83
Top Page Image Contents