Apple DDR-43+ manual IPod docking

Models: DDR-43+

1 49
Download 49 pages 9.89 Kb
Page 33
Image 33

iPod docking

Your DDR-43 Plus sound system has an iPod dock facility which allows you to play digital audio files and video soundtracks held on your iPod directly.

The DDR-43 Plus uses the Universal Dock Connector developed for use with iPods. Recent models of iPod are supplied with adaptor inserts which ensure correct alignment of the iPod with the electrical connector. Earlier models of iPod were not supplied with the necessary inserts, and so your DDR-43 Plus is supplied with insert types 1 - 7. Should you require a later insert to use your iPod with the DDR-43 Plus, then please contact an iPod accessories supplier.

1.Ensure that the sound system is in standby. Carefully remove the iPod dock connector cover from the top of your sound system.

2.Place the iPod docking adaptor (types 1 - 7 supplied with the DDR-43 Plus) into the iPod docking recess so that it is securely seated.

3.Carefully place your iPod on the universal iPod dock connector then press the On / Standby button to switch on the sound system.

To avoid possible damage to either device, not use your iPod without the correct adaptor fitted in the dock connector.

4.To select the iPod mode press the Media button until “iPod” shows on the display. If it was previously playing, your iPod will switch on and continue playing from where it was previously stopped.

Note:

The DDR-43 Plus sound system is able to recharge your iPod’s internal battery. Recharging does not take place while your DDR-43 Plus is using DAB+ or FM radio.

Your iPod will use its backlight settings as configured. If these need changing, use the iPod’s Settings menu.

GB

31

Page 33
Image 33
Apple DDR-43+ manual IPod docking