Ricoh GX200 VF KIT manual Troubleshooting, 235, Appendices, Error Messages

7 Appendices

Troubleshooting

Error Messages

If an error message is displayed on the screen, take the corresponding action.

Error Message	Cause and Action	Refer to
Insert Card	No card is loaded. Insert a card.	P.37
Set Date.	The date is not set. Set the date.	P.215
File Number Over Limit	The file number limit has been exceeded. Use another card.	P.213
		P.214
Unmatched File	The camera cannot display this file. Check the file contents on	-
	your computer, and then delete the file.
Insufficient Memory.	Because there is not sufficient capacity on the card, all the files	P.34
Continue?	cannot be copied. Use another card.
Protected	You are trying to delete a protected file.	P.158
Card Is Write- Protected.	The card is locked (write-protected). Unlock the card.	P.35
Print settings cannot be set	Print settings cannot be set for this file (movie, etc.).	-
for this file.
Insufficient Memory/	Files cannot be stored. Make sure there is enough free space or	P.60
Capacity short	delete unwanted files.	P.186
		P.187
	The image print number limit has been exceeded. Select an image	P.181
	and set the number to 0.
Format internal memory	You must format the internal memory.	P.187
Format card	The card is not formatted. Format the card with this camera.	P.186
Card Error	Reformat the card. If, after doing so, the error message still	P.186
	appears, the card may be faulty. Do not use the card.
Writing Data	Writing file to memory. Wait until writing finishes.	-
No File	There are no files that can be played back.	-
Cannot Record	The storage capacity is 0. Switch to another card or the internal	P.34
	memory.

Appendices

7

235