Ricoh GX200 VF KIT manual Assigning a Function to the ADJ. Lever ADJ Lever Set

5

Changing Camera Settings

Assigning a Function to the ADJ. Lever (ADJ Lever Set.)

When any of a number of shooting functions is assigned to the ADJ. lever, you can display the screen for that function with fewer button operations and without displaying the shooting menu. You can also use [ADJ Lever Set.1] to [ADJ Lever Set.4] to assign a camera function that can be activated by pressing the ADJ. lever.

For information on how to use the ADJ. mode, see P.72.

Available Settings		Refer to
Off		-
Expo. Cmp	*Default setting for [ADJ Lever Set.1]	P.138
Wht. Bal.	*Default setting for [ADJ Lever Set.2]	P.140
WB Correct		P.144
ISO	*Default setting for [ADJ Lever Set.3]	P.146
Quality	*Default setting for [ADJ Lever Set.4]	P.105
Focus		P.108
Image		P.117
Expo. Met.		P.111
Continuous		P.112
Auto BKT		P.127
Flash Comp		P.124
Flash Amt.		P.125

To assign a function to [ADJ Lever Set.1] to [ADJ Lever Set.4], follow the steps below.

1Display the setup menu.

• For the operating procedure, see P.184.

2Press the " button to select [ADJ Lever Set.1], [ADJ

Lever Set.2], [ADJ Lever Set.3], or [ADJ Lever Set.4], and then press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button.

200