Ricoh GX200 VF KIT manual Changing the File Name Setting Sequential No, 213

Changing the File Name Setting (Sequential No.)

When you shoot a still image, it is stored on an SD memory card or in the internal memory with a consecutively numbered file name that is automatically assigned.

When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card.

Available Settings	Description
On (Continue numbering)	File names are automatically assigned to still images you take, in
*Default setting	the format of “R” followed by seven digits, from R0010001.jpg to
	R9999999.jpg.
	With this setting, file numbering is continued from one card to the
	next.
Off (Do not continue	File numbering is assigned, from RIMG0001.jpg to
numbering)	RIMG9999.jpg, for each SD memory card.
	When the file name reaches RIMG9999, no more data can be
	recorded to that card.

To change the file name setting, follow the steps below.

1Display the setup menu.

• For the operating procedure, see P.184.

2Press the " button to select [Sequential No.] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button.

5

Changing Camera Settings

213